Stationery glueDefoamerWhat are the performance characteristics

Causes of foaming of stationery glue:
1. Foam is generated due to chemical reaction of other additives
2.Easily foaming substances in raw materials
3. The equipment power is not suitable, resulting in the generation of foam
4.Softer water quality
5. During the production, there is gas inflow during the stirring process, which causes foam generation.

In response to the above problems, Nanxiong Santuo Chemical Industry Co., Ltd. specially launched a water-based defoamer: DF581B

Stationary glue defoamer DF-581B is a mineral oil defoamer compounded by a special process. It does not contain APE, does not contain silicon, and is resistant to acid and alkali. With fast defoaming and antifoaming performance.

Chemical composition: wax oil-based defoamer

Advantage description
Dispersible in water, used in water-based systems without moisture, used in solvent-based systems in acidic and slightly alkaline systems, effectively non-ionic, silicone-free, surface defects of paint films reduced to a minimum of 100% active, economical, no Toxic, widely used

typical application
Coatings: polyvinyl acetate, polyvinyl alcohol, casein, dextrin, acrylic, natural and synthetic latex (latex), gels and glues

Adhesives: polyvinyl acetate, polyvinyl alcohol, casein, dextrin, acrylic, natural and synthetic latex (latex), gels and glues

Polymerization: polyvinyl acetate and its copolymers, acrylic acid, polyvinyl chloride (suspension method), emulsion polymerization

Drugs: used in the production of antibiotics and synthetic protein fermentation processes

Chemical process: asbestos latex slurry, wastewater treatment, distillation process, detergent production

General use: fermentation, carpet printing paste, textile scouring process, emulsion