Product description
Non-silicone defoamer STA-6300 is a kind of non-silicone defoaming polymer composition, which can have a good inhibition and removal effect on the bubbles caused by mechanical stirring and the reaction of the coating itself. Capacitive, does not affect the adhesion of the coating film.
Physical properties (This data is for experimental reference only. For detailed product technical information, please contact the company)
| composition | Solid content | proportion
(G / cm
3) | Exterior | Solvent |
| Polyacrylate | 90% | 0.95-0.97 | Light yellow viscous liquid | Aromatic hydrocarbon solvents |
Features and benefits
? Has a very strong defoaming and antifoaming effect, can be used as a standard defoamer in many solvent-based coatings
Agents, especially in non-polar solvents.
? In particular, it has a very good defoaming effect in primers and thick coatings with high powder content, without affecting recoating and adhesion of the coating film.
? Typical industry standard for high concentration resin type non-silicone foam breaking olymers.
Application range
? Acrylic resin, nitro lacquer, UV curing system, two-component polyurethane, epoxy resin, alkyd resin, baking system, etc.
Added amount
? 0.2-1% of the total system is recommended, adding effect is better before grinding.
Packaging specifications
? 25KG drum
Precautions
? Pay attention to sealing and low temperature storage. During operation, avoid direct contact with skin and eyes. Do not contaminate this product with other products and containers. Please test spray before each batch.
The above information is for experimental reference only and does not have any guarantee nature. Users should conduct test applicability according to their own conditions and requirements.
If you have any questions, please consult our technical staff: 137-2999-8903 / Mr. Ling
Current location:
